ACS714 Current Sensor Carrier -5A to +5A - PL-1185

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91195
Availability: In Stock Views: 7993
DeliverySame Day Delivery
Product Description
  • High accuracy and reliability
  • Optimized accuracy between -5A – 5A
  • Very little power loss
  • Can be inserted anywhere along the current path
$10.00
Qty: Add to Cart

Shipping Options to United States

Select Country:
* Region / State:

ACS714 Current Sensor Carrier -5A to +5A - PL-1185 info

ACS714 Current Sensor Carrier is a carrier board or breakout board for Allegro’s ACS714LLCTR-05B-T Hall effect-based linear current sensor. This sensor has an operating voltage of 5 V and an output sensitivity of 185 mV/A. The following list details some of the sensor’s key features:

  • Designed for bidirectional input current from -5 A to 5 A (though the robust sensor IC can tolerate 100 ms transient current spikes up to 100 A).
  • Conductive path internal resistance is typically 1.2 mΩ, and the PCB is made with 2-oz copper, so very little power is lost in the board.
  • Use of a Hall effect sensor means the IC is able to electrically isolate the current path from the sensor’s electronics (for applications up to 100 V), which allows the sensor to be inserted anywhere along the current path and to be used in applications that require electrical isolation.
  • 80 kHz bandwith.
  • Good accuracy and reliability: factory calibration results in a typical total output error of ±1.5% at room temperature, the output offset voltage is extremely stable, and the sensor has zero magnetic hysteresis.
  • Operating temperature range of -40°C to 125°C.

 

ACS714 Current Sensor Carrier -5A to +5A - General Specifications

  • High accuracy and reliability
  • Optimized accuracy between -5A – 5A
  • Very little power loss
  • Can be inserted anywhere along the current path

 

ACS714 Current Sensor Carrier -5A to +5A - Technical Specifications

  • Dimensions: 0.7’’x0.8’’
  • Weight: 1.3g
  • Current sense: 0.185V/A
  • Minimum logic voltage:4.5V
  • Maximum logic voltage:5.5V
  • Supply current:13mA

 

Videos

 

 

Documents

Allegro ACS714 current sensor datasheet

 

References

Pololu Web Sitehttps://www.pololu.com/product/1185

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: