Adafruit LED Sequins - Ruby Red - Pack of 5

Adafruit LED Sequins - Ruby Red - Pack of 5 info

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. Simply connect 3 to 6VDC to the + pin and ground to the - pin, and the LED on the board will light up. You can make the LEDs fade and twinkle by using a PWM signal.

This order comes with 5 Ruby Red "1206 size" LEDs, matched with a 100 ohm resistor. When powered from 3.3V they draw about 5mA so you can put up to 4 or 5 in parallel on a single microcontroller pin. We also have these sequins in ruby red, emerald green, royal blue, and rose pink.

Adafruit LED Sequins - Ruby Red - General Specifications

• Adafruit ruby red LED sequin
• 5 pieces a pack
• Single color
• 5mA current draw at 3,3V

Adafruit LED Sequins - Ruby Red - Technical Specifications

• Size:4mm x 9mm / .16" x .35"
• Thickness: 2mm
• Hole space: 7mm / .28" apart

Videos

Documents

Datasheet

References

Adafruit Web Site:

https://www.adafruit.com/products/1755