## Assembled Pi Cobbler Plus - Breakout Cable for Pi B+/A+/Pi 2 info

**Assembled Pi Cobbler Plus - Breakout Cable for Pi B+/A+/Pi 2** is an add on prototyping Pi Cobbler from **Adafruit** specifically designed for the B+ and Pi 2 that you can break out all power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This will make "cobbling together" prototypes with the Pi super easy.

**Assembled Pi Cobbler Plus - Breakout Cable for Pi B+/A+/Pi 2** is designed for use with Raspberry Pi Model A+/B+/Pi 2 only! No soldering required!

**Assembled Pi Cobbler Plus - Breakout Cable for Pi B+/A+/Pi 2** is in a compact shape, which is the least bulky way to wire up. The cable plugs between the Pi A+/B+/Pi 2 computer and the Cobbler breakout. The Cobbler can plug into any solderless breadboard (or even a prototyping board like the PermaProto). The Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk.

## Assembled Pi Cobbler Plus - Breakout Cable for Pi B+/A+/Pi 2 - General Specifications

- Raspberry Pi A+/B+/2 compatible
- Compact shape
- Breadboard compatible
- Fast and easy prototyping
- No need to solder

## Assembled Pi Cobbler Plus - Breakout Cable for Pi B+/A+/Pi 2 - Technical Specifications

**Dimensions**: 63mm x 20mm x 11mm**Height with Pins**: 20mm**Weight**: 12g

### Videos

### Documents

### References

**Adafruit Web Site**: https://www.adafruit.com/products/2029