## Assembled Pi T-Cobbler Plus - GPIO Breakout for RasPi A+/B+/Pi 2 info

**Assembled Pi T-Cobbler Plus - GPIO Breakout for RasPi A+/B+/Pi 2 **is a T-shaped add on prototyping Pi Cobbler from **Adafruit** specifically designed for the B+ and Pi 2 that you can break out all power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This will make "cobbling together" prototypes with the Pi super easy.

**Assembled Pi T-Cobbler Plus - GPIO Breakout for RasPi A+/B+/Pi 2 **is designed for use with Raspberry Pi Model A+/B+/Pi 2 only! No soldering required!

**Assembled Pi T-Cobbler Plus - GPIO Breakout for RasPi A+/B+/Pi 2 **is not as compact as **Assembled Pi Cobbler Plus - Breakout Cable for Pi B+/A+/Pi 2**, but still a less bulky way to wire up. The cable plugs between the Pi A+/B+/Pi 2 computer and the T-Cobbler breakout. The T-Cobbler can plug into any solderless breadboard (or even a prototyping board like the PermaProto). The Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk.

## Assembled Pi T-Cobbler Plus - GPIO Breakout for RasPi A+/B+/Pi 2 - General Specifications

- Raspberry Pi A+/B+/2 compatible
- Compact T-shaped
- Breadboard compatible
- Fast and easy prototyping
- No need to solder

## Assembled Pi T-Cobbler Plus - GPIO Breakout for RasPi A+/B+/Pi 2 - Technical Specifications

**Dimensions**: 73mm x 20mm x 11mm**Height with Pins**: 19mm**Width at Top of T**: 58mm**Weight**: 14g

### Videos

### Documents

### References

**Adafruit Web Site**: https://www.adafruit.com/product/2028