LPG / Isobutane / Propane Gas Sensor MQ-6

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91180
Availability: SOLD OUT Views: 5584
Product Description
  • Good sensitivity to flammable gas in wide range
  • High sensitivity to Propane, Isobutane and LPG
  • Long life and low cost
  • Simple drive circuit
$6.00
Qty:

Shipping Options to United States

Select Country:
* Region / State:

LPG / Isobutane / Propane Gas Sensor MQ-6 info

About the Product

 

LPG / Isobutane / Propane Gas Sensor MQ-6 detects the concentrations of LPG, Isobutane and Propane in the air and ouputs its reading as an analog voltage. The sensor can measure concentrations of 300 to 10000 ppm. The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5 V.

Connecting five volts across the heating (H) pins keeps the sensor hot enough to function correctly. Connecting five volts at either the A or B pins causes the sensor to emit an analog voltage on the other pins. A resistive load between the output pins and ground sets the sensitivity of the detector. The resistive load should be calibrated for your particular application using the equations in the datasheet, but a good starting value for the resistor is 20 kΩ.

 

Product Description

 

  • Good sensitivity to flammable gas in wide range
  • High sensitivity to Propane, Isobutane and LPG
  • Long life and low cost
  • Simple drive circuit

 

Technical Specifications

 

  • Detection Gas: Isobutane, Propane, LPG
  • Concentration: 300-10000ppm
  • Supply Voltage: <24V
  • Heater Voltage: 5.0V ± 0.2V
  •  Load Resistance: Adjustable
  • Heater Resistance: 31Ω ± 3Ω
  • Heater Consumption: <900mW

 

Videos

 

 

Documents

 

Propane gas sensor MQ-6 datasheet

 

References

 

Pololu Web Site:

https://www.pololu.com/product/1481

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: