Low-profile microSD Card Adapter for Raspberry Pi

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91831
Availability: SOLD OUT Views: 5927
Product Description
  • Adafruit low-profile microSD card adapter for Raspberry Pi
  • Half the length of standard microSD card
$3.50
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Low-profile microSD Card Adapter for Raspberry Pi info

Make your Pi a little slimmer with Low-Profile MicroSD Card Adapter For Raspberry Pi. It slides in where the SD card goes but is half the length. Pop in a microSD card for a sleeker machine. The microSD card holder is a push-push type so you can push on the edge that sticks out to remove the card when necessary.

Depending on the case from various manufacturers, Low-Profile MicroSD Card Adapter For Raspberry Pi may not easily slide in and out or may need modifications to the PCB or actual case. The microSD card adapter is meant for a stand-alone board or with use on our Pi Dish or VESA mount. It does not fit in a PiBow case, for certain. You might be able to build an Adafruit Pi Box around a Pi with the adapter inserted but it isn’t a good fit and the card can’t be ejected while installed and it’s not recommended to be used with the Pi Box. Other cases may or may not work, so be aware before assuming that this will work with your case.

Note: Micro SD Card and Raspberry Pi is NOT included.

 

Low-Profile MicroSD Card Adapter For Raspberry Pi - General Specifications

  • Adafruit low-profile microSD card adapter for Raspberry Pi
  • Half the length of standard microSD card

 

Low-Profile MicroSD Card Adapter For Raspberry Pi - Technical Specifications

  • MicroSD kart takılı iken Raspberry Pi ucundan 3mm çıkıntı yapar
  • Kalınlık (Raspberry Pi tabanından itibaren gereken açıklık) 5,5mm

 

References

Adafruit Product Page: https://www.adafruit.com/products/966

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: