PiTFT Enclosure for Raspberry Pi Model B is perfect for accommodating both the standard PiTFT 2.8" resistive and Adafruit’s capacitive version. It has a frosted plastic base on the bottom with a black top that's open enough so your 2.8" screen can shine through and you can navigate with either your finger or your stylus - depending on what screen you're using.
PiTFT Enclosure for Raspberry Pi Model B is elegant and curvy, with a great design by Mike Doell. Just snap the Pi into the bottom for a secure press-fit. There's a space for all your ports and a slot for your GPIO ribbon cable to flow freely outside. There are some button extenders that you can snap into the PiTFT to make your set up look extra sleek and official when paired with our tactile switch buttons.
PiTFT Enclosure for Raspberry Pi Model B is not compatible with the Raspberry Pi Model B+. This case is designed for the Rev 2 Model B Pi which has the two mounting holes. If you have an older Rev 1, you can fit the Pi in the case but the two nubs have to be dremeled/cut out.
Adafruit Web Site: https://www.adafruit.com/products/1892