Pololu 5:1 Micro Metal Gearmotor HP - PL-1000

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91239
Availability: SOLD OUT Views: 7132

Product Description
  • 4.995:1 gear ratio
  • 3 mm shaft diameter
  • 6000rpm free run speed
  • 120mA free run current
  • 1600mA stall current
  • 0.1kg.cm stall torque
$17.00
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Pololu 5:1 Micro Metal Gearmotor HP - PL-1000 info

About the Product

 

Pololu 5:1 Micro Metal Gearmotor HP is intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. All of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change.

 

Product Description

 

  • 4.995:1 gear ratio
  • 3 mm shaft diameter
  • 6000rpm free run speed
  • 120mA free run current
  • 1600mA stall current
  • 0.1kg.cm stall torque

 

Technical Specifications

 

  • Size: 24 x 10 x 12 mm
  • Weight: 9.6g
  • Shaft diameter: 3 mm
  • Gear ratio: 4.995:1
  • Free-run speed @ 6V: 6000 rpm
  • Free-run current @ 6V: 120 mA
  • Stall current @ 6V: 1600 mA
  • Stall torque @ 6V: 0.1kg.cm

 

Videos

 

 

Documents

 

 

References

 

Pololu Web Site:

https://www.pololu.com/product/1000

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: