Pololu Dual MC33926 Motor Driver Carrier - PL-1213

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91214
Availability: SOLD OUT Views: 16374
Product Description
  • Wide operating voltage range: 5 – 28 V
  • Output current: 3 A continuous (5 A peak) per motor
  • PWM operation up to 20 kHz, which is ultrasonic and allows for quieter motor operation
  • Current sense voltage output proportional to motor current (approx. 525 mV/A)
  • Detailed user’s guide
  • Reverse-voltage protection on motor supply
  • Over-current limiting
  • Over-temperature shutdown
  • Under-voltage shutdown
  • Output short-to-ground and short-to-Vcc protection
$25.00
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Pololu Dual MC33926 Motor Driver Carrier - PL-1213 info

Pololu Dual MC33926 Motor Driver Carrier is a breakout board featuring two Freescale MC33926 H-bridge ICs. It can supply up to almost 3 A continuous current per channel to two brushed DC motors at 5 – 28 V, and it can tolerate peak currents up to 5 A per channel for a few seconds, making Pololu Dual MC33926 Motor Driver Carrier a great general-purpose motor driver for medium-sized DC motors and for differential-drive robots that use such motors. The MC33926 supports ultrasonic (up to 20 kHz) pulse width modulation (PWM) of the motor output voltage, which eliminates the audible switching sounds caused by PWM speed control, and a current feedback circuit for each motor outputs an analog voltage on its respective FB pin that is proportional to the output current.

 

Pololu Dual MC33926 Motor Driver Carrier - General Specifications

  • Wide operating voltage range: 5 – 28 V
  • Output current: 3 A continuous (5 A peak) per motor
  • PWM operation up to 20 kHz, which is ultrasonic and allows for quieter motor operation
  • Current sense voltage output proportional to motor current (approx. 525 mV/A)
  • Detailed user’s guide
  • Reverse-voltage protection on motor supply
  • Over-current limiting
  • Over-temperature shutdown
  • Under-voltage shutdown
  • Output short-to-ground and short-to-Vcc protection

 

Pololu Dual MC33926 Motor Driver Carrier - Technical Specifications

  • Motor driver: MC33926
  • Motor channels: 2
  • Minimum operating voltage: 5 V
  • Maximum operating voltage: 28 V
  • Continuous output current per channel: 2.5A
  • Peak output current per channel: 5A
  • Current sense: 0.525 V/A
  • Maximum PWM frequency: 20 kHz
  • Minimum logic voltage: 2.5 V
  • Maximum logic voltage: 5.5 V
  • Size: 1.10″ × 1.80″
  • Weight: 7.4 g

 

Videos

 

 

Documents

MC33926 H-Bridge Datasheet

 

References

Pololu Web Sitehttps://www.pololu.com/product/1213

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: