Pololu High-Power Motor Driver 36v15 - PL-760

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91220
Availability: SOLD OUT Views: 12081
Product Description
  • Discrete MOSFET H-bridge motor driver
  • Designed to drive large brushed DC motors
  • 15A maximum continuous current output without a heat sink
  • 20A maximum continuous current with a heat sink
$73.00
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Pololu High-Power Motor Driver 36v15 - PL-760 info

Pololu High-Power Motor Driver 36v15 is a discrete MOSFET H-bridge designed to drive large DC brushed motors. The H-bridge is made up of one N-channel MOSFET per leg, and most of the board’s performance is determined by these MOSFETs (the rest of the board contains the circuitry to take user inputs and control the MOSFETs). The MOSFETs have an absolute maximum voltage rating of 50 V, and higher voltages can permanently destroy the motor driver. Under normal operating conditions, ripple voltage on the supply line can raise the maximum voltage to more than the average or intended voltage, so a safe maximum voltage is approximately 44 V.

The versatility of Pololu High-Power Motor Driver 36v15 makes it suitable for a large range of currents and voltages: it can deliver up to 15A of continuous current with a board size of only 1.8" by 0.8" and no required heat sink. With the addition of a heat sink, it can drive a motor with up to about 20A of continuous current. The module offers a simple interface that requires as little as two I/O lines while allowing for both sign-magnitude and locked-antiphase operation. Integrated detection of various short-circuit conditions protects against common causes of catastrophic failure; however, please note that Pololu High-Power Motor Driver 36v15 does not include reverse power protection or any over-current or over-temperature protection.

Note: Battery voltages can be much higher than nominal voltages when they are charged, so the maximum battery voltage we recommend is 36 V unless appropriate measures are taken to limit the peak voltage

 

Pololu High-Power Motor Driver 36v15 - General Specifications

  • Discrete MOSFET H-bridge motor driver
  • Designed to drive large brushed DC motors
  • 15A maximum continuous current output without a heat sink
  • 20A maximum continuous current with a heat sink

 

Pololu High-Power Motor Driver 36v15 - Technical Specifications

  • Motor channels: 1
  • Minimum operating voltage: 5.5 V
  • Maximum operating voltage: 50 V
  • Continuous output current per channel: 15 A
  • Maximum PWM frequency: 40 kHz
  • Maximum logic voltage: 5.5 V
  • MOSFET on-resistance (max per leg): 5 mΩ
  • Size: 1.8" x 0.8"
  • Weight: 4.2 g

 

Videos

 

 

Documents

FDS5672 datasheet

 

References

Pololu Web Sitehttps://www.pololu.com/product/760

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: