Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 35×36mm, 2.7V, 1 A/Phase

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91265
Availability: SOLD OUT Views: 10344
Product Description
  • 5mm output shaft
  • 200 steps per revolution
  • 1A current per coil
  • 2.7 V voltage rating
  • 2.7 Ω resistance per coil
  • 1.4kg-cm holding torque
  • 4.3mH Inductance per coil
  • Output shaft supported by two ball bearings
$21.96
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 35×36mm, 2.7V, 1 A/Phase info

This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1A at 2.7 V, allowing for a holding torque of 1.4kg-cm (14 oz.-in).

The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver.

 

Pololu Stepper Motor: Bipolar, 200 Steps/Rev - General Specifications

  • 5mm output shaft
  • 200 steps per revolution
  • 1A current per coil
  • 2.7 V voltage rating
  • 2.7 Ω resistance per coil
  • 1.4kg-cm holding torque
  • 4.3mH Inductance per coil
  • Output shaft supported by two ball bearings

 

Pololu Stepper Motor: Bipolar, 200 Steps/Rev - Technical Specifications

  • Size: 35mm square x 36mm (Not including the shaft)
  • NEMA size: 14
  • Weight: 180g
  • Shaft diameter: 5mm
  • Shaft type: 5mm “D”
  • Steps per revolution: 200
  • Current rating: 1000mA per coil
  • Voltage rating: 2.7V
  • Holding torque: 1.4kg-cm
  • Resistance: 2.7 Ω per coil
  • Inductance per phase: 4.3mH
  • Number of leads: 4
  • Lead length: 30cm

 

Videos

 

 

Documents

Datasheet

 

References

Pololu Websitehttps://www.pololu.com/product/1209

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: