Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 28×45mm, 4.5V, 0.67 A/Phase

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91262
Availability: SOLD OUT Views: 10554
Product Description
  • 5mm output shaft
  • 200 steps per revolution
  • 670mA current per coil
  • 4.5 V voltage rating
  • 6.8 Ω resistance per coil
  • 950g-cm holding torque
  • 4.9mH Inductance per coil
  • Output shaft supported by two ball bearings
$27.00
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Pololu Stepper Motor: Bipolar, 200 Steps/Rev, 28×45mm, 4.5V, 0.67 A/Phase info

This NEMA 11-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 670 mA at 4.5 V, allowing for a holding torque of 950 g-cm (13 oz.-in).

The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver.

 

Pololu Stepper Motor: Bipolar, 200 Steps/Rev - General Specifications

  • 5mm output shaft
  • 200 steps per revolution
  • 670mA current per coil
  • 4.5 V voltage rating
  • 6.8 Ω resistance per coil
  • 950g-cm holding torque
  • 4.9mH Inductance per coil
  • Output shaft supported by two ball bearings

 

Pololu Stepper Motor: Bipolar, 200 Steps/Rev - Technical Specifications

  • Size: 28mm square x 45mm (Not including the shaft)
  • NEMA size: 11
  • Weight: 140g
  • Shaft diameter: 5mm
  • Shaft type: 5mm “D”
  • Steps per revolution: 200
  • Current rating: 670mA per coil
  • Voltage rating: 4.5V
  • Holding torque: 950g-cm
  • Resistance: 6.8 Ω per coil
  • Inductance per phase: 4.9mH
  • Number of leads: 4
  • Lead length: 30cm

 

Videos

 

 

Documents

Datasheet

 

References

Pololu Websitehttps://www.pololu.com/product/1206

 

 

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: