Raspberry Pi - HDMI 4 Pi - 10.1" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91332
Availability: SOLD OUT Views: 11405
Product Description
  • 10.1-inch TFT display
  • High resolution and great angle visibility
  • Thin, bright and high-res
  • Driver board with HDMI, VGA and composite inputs included
  • Very easy to use
  • Adjustable brightness, color and contrast
  • Auto-detects input
$140.00
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Raspberry Pi - HDMI 4 Pi - 10.1" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL info

Raspberry Pi - HDMI 4 Pi - 10.1" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL is a 10.1" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. We include a driver board with HDMI, VGA and Composite inputs.

There's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tried to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.

Raspberry Pi - HDMI 4 Pi - 10.1" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.

For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to 1280x800 in case it doesn't detect the resolution properly.

For use with a BeagleBone black, we found it works when plugged in, no configuration required.

A power adapter is NOT included.

 

Raspberry Pi - HDMI 4 Pi - 10.1" Display IPS - HDMI/VGA/NTSC/PAL - General Specifications

  • 10.1-inch TFT display
  • High resolution and great angle visibility
  • Thin, bright and high-res
  • Driver board with HDMI, VGA and composite inputs included
  • Very easy to use
  • Adjustable brightness, color and contrast
  • Auto-detects input

 

Raspberry Pi - HDMI 4 Pi - 10.1" Display IPS - HDMI/VGA/NTSC/PAL - Technical Specifications

  • Power with 9-12VDC (recommended)
  • 16:10 display ratio
  • Resolution: 1200 x 800
  • Visible area: 217mm x 135mm 16:10
  • Brightness: 350cd/m2
  • Contrast: 800:1
  • We ship with a an HSD101PWW1 display, or equivalent
  • Not HDCP compatible - it cannot be used with 'secured' HDMI sources
  • Display dimensions: 220mm x 139mm / 8.7" x 5.5"
  • Thickness: 5mm / 0.2"
  • Mounting Tab Hole Diameter: range between 2.1mm - 2.9mm / 0.08" - 0.11"
  • Bottom Mounting Hole Distance: 62mm / 2.4"
  • Top Mounting Hole Distance: 87mm / 3.4"
  • Right Side Mounting Hole Distance (closer hole): 125mm / 4.9"
  • Right Side Mounting Hole Distance (further hole): 130mm / 5.1"
  • Left Side Mounting Hole Distance (closer hole): 118mm / 4.6"
  • Left Side Mounting Hole Distance (further hole): 124mm / 4.9"

 

Videos

 

 

Documents

Driver Datasheet

Keyboard Datasheet

 

References

Adafruit Websitehttp://www.adafruit.com/products/1287

 

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: