Reprap Ramps 1.4 3d Printer Control Card

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 81847
Availability: SOLD OUT Views: 2355
$9.18
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Reprap Ramps 1.4 3d Printer Control Card info

Ramps (RepRap Arduino Mega Pololu Shield) 1.4; It is a control card that is often used in 3D printers. Ramps 1.4, which can be used with Arduino Mega or similar cards with a similar pin arrangement; Shield structure allows Arduino Mega to be mounted directly on top.
 
If you want to make your own 3D printer or change the control card of your existing 3D printer, you can use this card easily. Ramps, which has open source hardware, has reached many users with this feature and therefore the card has been developed quite a bit.
 
Reprap, Mendel and Prusa compatible Ramps, 5 step motor allows control.
 
Five A4988 motor driver cards can be installed on the product to provide control of the appropriate stepper motors. Engine drivers are not included in the product package. Ramps offers 2 engine support for 1 X axis and 1 Z axis for Y axis, and 2 step motor support for Extruder. In addition to these features, there are also 3 heater outputs and 3 limit-switch inputs. In addition, Ramps compatible LCD display input is also provided from the connector on the product.
 
Product features:
Extensible infrastructure to control different accessories,
3 Mosfet Outlets for Heater and Fan,
3 Thermistor Output
Additional 5A fuse for high security and protection
11A Heat plate insurance
5 A4988 Step Motor Driver Card Support
The female headers make it easy to attach and remove the drivers.
I2C and SPI pins left for future use
All MOSFETs are connected to PWM outputs for versatile use. Thanks to the male headers, the limit switch, motor and LED connections can be made easily. These connectors are able to withstand up to 3A.
The internal SD card slot is not available on the product, but SD card modules can be connected to the card.
The LEDs will light up when the heater outputs are activated.
The Prusa Mendel model features two motors for the Z axis.

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: