OO-KUMA Wood-Fill PLA 3mm Filament

OO-KUMA Wood-Fill PLA 3mm Filament info

OO-KUMA Wood-Fill PLA 3mm Filament lets you have unique wood textures on your prints. You can change the working temperature of your printer to get lighter or darker colors. The filament is created by impregnating more than 30% of wood fibers into Oo-kuma’s PLA filament which provides real wood texture, smell and feel.

OO-KUMA Wood-Fill PLA 3mm Filament is suitable for any commercially available 3D printer. The filament is tested for 1.2, 1.0 and 0.8mm nozzles.

Heatbed usage is not necessary with this filament, but if required a 50-60°C heatbed can be used. The working temperature of the extruder is between 195-220°C.

Note: The manufacturer suggests using Oo-kuma extruder cleaning filament prior and after printing with OO-KUMA Wood-Fill PLA 3mm Filament for best performance.

OO-KUMA Wood-Fill PLA 3mm Filament - General Specifications

• Wood-fiber fill 3mm PLA filament
• 50-60°C heatbed temperature
• 195-220°C extruder temperature
• 600g spool size
• Easy flow
• Color variation depending on temperature
• Real wood texture and feel
• Homogeneous fiber content

OO-KUMA Wood-Fill PLA 3mm Filament - Technical Specifications

Physical:

• Specific Gravity: 1,1g/cm³

Mechanical:

• Tensile Strenth (at yield): 34MPa
• Elongation (at break): 3,4-3,8%
• Tensile Modulus: 3800MPa
• Flexural Modulus: 3700MPa
• Notched Impact Strength (charpy): 4,8kJ/m²
• Impact Strength (charpy): 11,7kJ/m²

Thermal:

• Melting Point: 160-175°C

Videos

Documents

Oo-Kuma CF0 Datasheet

References

Oo-Kuma Product Page: http://www.oo-kuma.com/store/p99/Wood-Fill_PLA.html