Raspberry Pi Model B+ Starter Pack - Without Raspberry Pi B+

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91344
Availability: SOLD OUT Views: 8129
Product Description
  • Adafruit Raspberry Pi B+ Case - Smoke Base / Clear Top
  • Adafruit Assembled Pi Cobbler Plus - Comes with a breakout board that's perfect for cobbling prototypes as well as a 40-pin GPIO cable for your Pi's pins.
  • Full Size Breadboard - With 40 pins to break out, you're going to need some space - and that's why we're including a full size breadboard in this pack.
  • Premium Male/Male Jumper Wires - 20 x 6" (150mm)
  • USB to TTL Serial Cable - This cable's pretty much the easiest way to connect your Raspberry Pi to a USB port to log into the debugging/login console.
  • USB WiFi Module
  • 4GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy
  • 5V 2A Switching Power Supply w/ 6' MicroUSB Cable or 5V 2A Switching Power Supply with USB port + 6' MicroUSB Cable
  • Embroidered Raspberry Pi
  • 1x Photo Cell
  • 5x 10K 5% 1/4W Resistor
  • 5x 560 ohm 5% 1/4W Resistor
  • 1x Diffused 10mm Blue LED
  • 1x Electrolytic Capacitor - 1.0uF
  • 1x Diffused 10mm Red LED
  • 1x Diffused 10mm Green LED
  • 3x 12mm Tactile Switches
$70.00
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Raspberry Pi Model B+ Starter Pack - Without Raspberry Pi B+ info

We've hand chosen these accessories as the perfect accompaniment to your new Raspberry Pi Model B+.  It's everything you need to get going with a high quality power supply, Raspbian SD card, case, Wi-Fi adapter, console cable, and lots of prototyping essentials.  It's a great jumping off point for the rest of our extensive accessory and pack collection.

This pack DOES NOT come with a Raspberry Pi Model B+. The kit which contains a Raspberry Pi Model B+ can be found here.

 

Raspberry Pi Model B+ Starter Pack -General Specifications

This pack contains:

  • Adafruit Raspberry Pi B+ Case - Smoke Base / Clear Top
  • Adafruit Assembled Pi Cobbler Plus - Comes with a breakout board that's perfect for cobbling prototypes as well as a 40-pin GPIO cable for your Pi's pins.
  • Full Size Breadboard - With 40 pins to break out, you're going to need some space - and that's why we're including a full size breadboard in this pack.
  • Premium Male/Male Jumper Wires - 20 x 6" (150mm)
  • USB to TTL Serial Cable - This cable's pretty much the easiest way to connect your Raspberry Pi to a USB port to log into the debugging/login console.
  • USB WiFi Module
  • 4GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy
  • 5V 2A Switching Power Supply w/ 6' MicroUSB Cable or 5V 2A Switching Power Supply with USB port + 6' MicroUSB Cable
  • Embroidered Raspberry Pi
  • 1x Photo Cell
  • 5x 10K 5% 1/4W Resistor
  • 5x 560 ohm 5% 1/4W Resistor
  • 1x Diffused 10mm Blue LED
  • 1x Electrolytic Capacitor - 1.0uF
  • 1x Diffused 10mm Red LED
  • 1x Diffused 10mm Green LED
  • 3x 12mm Tactile Switches

 

Raspberry Pi Model B+ Starter Pack - Technical Specifications

 

 

Videos

 

 

Documents

 

 

References

Adafruit Websitehttp://www.adafruit.com/products/2126

 

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: