STM32F030F4P6 Mini Development Board

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 71134
Availability: SOLD OUT Views: 4644

Shipping Options to United States

Select Country:
* Region / State:

STM32F030F4P6 Mini Development Board info

48 MHz, 32bit MCU with Cortex M0 core was used from F family of ST company. Despite the compact structure, all hardware requirements for working are on the card. Card feed via Microusb socket is provided. Program and debug operations can be done with SWD socket. The reset button, crystal and pin headers come in kit which you may need to develop the application. With this kit you can enter the world of 32 bit ARM immediately.

Mcu Features:

  • Core: ARM® 32-bit CortexTM-M0 CPU, frequency: ≤48 MHz


  • 16 to 64 Kbytes of Flash memory
  • 4 to 8 Kbytes of SRAM with HW parityChecking: CRC calculation unit Reset and power managemen
  • Voltage range: 2.4 V to 3.6 V
  • Power-on / Power down reset (POR / PDR)
  • Low power modes: Sleep, Stop, Standby Clock management
  • 4 to 32 MHz crystal oscillator
  • 32 kHz oscillator for RTC with calibration
  • Internal 8 MHz RC with x6 PLL option
  • Internal 40 kHz RC oscillator Up to 55 fast I / Os
  • All mappable on external interrupt vectors
  • Up to 36 I / Os with 5 V tolerant capability 5-channel DMA controller 1 x 12-bit, 1.0 μs ADC (up to 16 channels)
  • Conversion range: 0 to 3.6 V
  • Separate analog supply from 2.4 up to 3.6 V Up to 10 timers
  • One 16-bit 7-channel advanced-control timer for 6 channels PWM output with deadtime generation and emergency stop
  • One 16-bit timer, with up to 4 IC / OC, usable for IR control decoding
  • One 16-bit timer with 2 IC / OC, 1 OCN, deadtime generation and emergency stop
  • Two 16-bit timers, each with IC / OC and OCN, deadtime generation, emergency stop and modulator gate for IR control
  • One 16-bit timer with 1 IC / OC
  • One 16-bit basic time
  • Independent and system watchdog timers
  • SysTick timer: 24-bit downcounter Calendar RTC with alarm and periodic wake up from Stop / Standby Communication interfaces
  • Up to two I2C interfaces: one supporting Fast Mode Plus (1 Mbit / s) with 20 mA current sink
  • Up to two USARTs supporting master synchronous SPI and modem control; one with auto baud rate detection
  • Up to two SPIs (18 Mbit / s) with 4 to 16 programmable bit frames Serial wire debug (SWD)

Package Included :

  • 1 STM32F030F4P6 Development Card.
  • 2 Pcs 12 Pin Male Header
  • 1 8 Mhz Crystal
There are no reviews for this product.
Write a review Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: