Wifi Shield V2.0 / SeeedStudio

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 81603
Availability: SOLD OUT Views: 4352

Shipping Options to United States

Select Country:
* Region / State:

Wifi Shield V2.0 / SeeedStudio info

Advance with the RN171 TCP / IP module WiFi shields allow connection of Arduino / Seeeduin wireless networks up to 802.11b. The RN171 module supports TCP, UDP, FTP, and HTTP communication protocols to meet the needs of many wireless and Internet IoT (Internet of Things) network projects, such as smart home appliances, robot controllers and personal air stations.

Shields emit powerful signals with a large and new stable antenna card. You can choose which digital pins (D0 to D7) to use for the RX and TX with the arduino default communication protocol UART / Serial and the two jump lines we have included. The shield has two Grove connectors, I2C and Serial, and can be plugged with other Groves.



Step by step demos with teachers
Low power consumption
Compatible with Arduino, easy to start
CMD Support
Technical Details

Voltage: 3.3 - 5.5 V
Current: 25 ~ 400mA
Transmit power: 0-10 dBm
Frequency: 2402 ~ 2480 MHz
Interface: UART (You can select software serial, digital pins RN171in RX and TX)
Ag rate: 6 to 54 Mbps for 1-11 Mbps / 802.11g for 802.11g
Secure WiFi authentication: WEP-128, WPA-PSK (TKIP), WPA2-PSK (AES)
Internal network applications: DHCP client, DNS client, ARP, ICMP ping, FTP, TELNET, HTTP, UDP, TCP
RN-171: WIFLY GSX 802.11 b / g Wireless LAN Module.

There are no reviews for this product.
Write a review Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: