Carbon Monoxide Gas Sensor MQ-7

0 reviews  (0/5 ) 0 reviews  •  Write a review
Product Code: 91177
Availability: SOLD OUT Views: 12206
Product Description
  • Good sensitivity to combustable gas in wide range
  • High sensitivity to natural gas
  • Long life and low cost
  • Simple drive circuit
$7.00
Qty:

Shipping Options to United States

Select Country:
* Region / State:

Carbon Monoxide Gas Sensor MQ-7 info

About the Product

 

Carbon Monoxide Gas Sensor MQ-7 detects the concentrations of CO in the air and ouputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 ppm.The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5 V.

Connecting five volts across the heating (H) pins keeps the sensor hot enough to function correctly. Connecting five volts at either the A or B pins causes the sensor to emit an analog voltage on the other pins. A resistive load between the output pins and ground sets the sensitivity of the detector. The resistive load should be calibrated for your particular application using the equations in the datasheet, but a good starting value for the resistor is 10 kΩ.

 

Product Description

 

  • Good sensitivity to combustable gas in wide range
  • High sensitivity to natural gas
  • Long life and low cost
  • Simple drive circuit

 

Technical Specifications

 

  • Detection Gas: Carbon Monoxide
  • Concentration: 10-10000ppm
  • Supply Voltage: <10V
  • Heater Voltage: 5.0V ± 0.2V
  • Load Resistance: Adjustable
  • Heater Resistance: 31Ω ± 3Ω
  • Heater Consumption: <350mW

 

Videos

 

 

Documents

 

Carbon Monoxide gas sensor MQ-7 datasheet

References

 

Pololu Web Site:

https://www.pololu.com/product/1482

There are no reviews for this product.
Write a review Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: